3D-printed teardrop micro camper sleeps a family of three at a squeeze

3D-printed teardrop micro camper sleeps a family of three at a squeeze

by

We’ve seen 3D printers used for everything from tiny houses to US marine barracks and now we can add teardrop trailer to the list too, courtesy of Lemki Robotix and iScale3D.

Named the Discover 3D, it features a compact frame that’s rated for a family of three and includes a tailgate galley, plus some optional off-the-grid tech.

The camper measures 3.2 m (10.5 ft) x 1.8 m (5.10 ft) x 1.8 m (5.10 ft) and consists of a standard single-axle trailer with a 3D-printed shell on top. Total weight comes in at 400 kg (roughly 880 lb), so it’s on the lighter side for a teardrop and you won’t need a beast of a truck to pull it.

The interior is definitely snug and though it’s rated for a family of three, two people looks like a more comfortable fit. In addition to its bed, it also includes some shelving and a little storage space.

The Discover 3D measures 3.2 m (10.5 ft) x 1.8 m (5.10 ft) x 1.8 m (5.10 ft)

Vasyl Gonar

Back outside is a flip-up tailgate that provides access to the galley. This is quite basic but does feature a small propane-powered two-burner stove and a sink, so should be sufficient for preparing basic meals and hot drinks. Additionally, the camper can optionally be fitted with a roof-based solar panel kit and batteries, which could be useful if someone wanted to install a mini-fridge or perhaps keep a TV running in the main sleeping area. The press release also says there are sensors for temperature, water levels and more.

The Discover 3D's cozy interior includes the main bed, plus some shelving and storage space
The Discover 3D’s cozy interior includes the main bed, plus some shelving and storage space

Vasyl Gonar

The 3D-printing process for the main shell used a FGF (fused granulate fabrication) printing technology. This involves feeding pellets of thermoplastic that are melted and then extruded out of a nozzle in layers, building up the basic structure of the shell. Designer Vasyl Gonar tells us that the polypropylene used was sourced from 7,400 recycled plastic bottles, plus fiberglass was also used.

If you’d like to try out one of these yourself, startup iScale3D is planning on making them available for preorder from €12,000 (almost US$13,000) up to €18,000 ($19,300), depending on options. They’ll also be available to rent for €60 ($64) per day. We’ve no word yet on availability but more information will be available via the source link in the coming days.

Source: iScale3D

Read original article here

Denial of responsibility! Pioneer Newz is an automatic aggregator of the all world’s media. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials, please contact us by email – [email protected]. The content will be deleted within 24 hours.

Leave a Comment